| FEAT |
SPECIAL FEATURES |
THICKNESS OF BASE TAPERED FROM 0.070 TO 0.035 |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ADBR |
DISTANCE FROM BASE TO CENTER OF APERTURE |
0.460 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| ADFV |
DISTANCE FROM MOUNTING HOLE CENTER TO BASE |
0.150 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY BASE |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL NUT |
| CQFM |
HARDNESS RATING |
NOT RATED |
| ADEB |
PLATE THICKNESS |
0.085 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| ACVN |
NUT LENGTH |
1.350 INCHES MINIMUM AND 1.410 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ACTA |
NUT STYLE |
PLATE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| ADEC |
PLATE WIDTH |
0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| ADFX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH |
0.260 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/12,ALLOY 7075,T6 OR T651 FED SPEC SINGLE MATERIAL RESPONSE BASE |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| BZRR |
THREAD SERIES |
UNJF |
| ADEA |
NUT HEIGHT |
0.281 INCHES MAXIMUM |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |