| CMLP |
THREAD QUANTITY PER INCH |
24 |
| ACVN |
NUT LENGTH |
1.516 INCHES MINIMUM AND 1.546 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNF |
| ADEB |
PLATE THICKNESS |
0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM BASE |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL NUT |
| MATT |
MATERIAL |
STEEL COMP 1212 BASE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5010 ASSN STD SINGLE MATERIAL RESPONSE BASE |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AAWY |
COUNTERBORE DIAMETER |
0.383 INCHES MINIMUM NUT AND 0.388 INCHES MAXIMUM NUT |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING INSERT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5010 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATT |
MATERIAL |
STEEL COMP 1212 NUT |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE BASE |
| ADEA |
NUT HEIGHT |
0.751 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ADFK |
NUT COUNTERBORE DEPTH |
0.292 INCHES MINIMUM NUT AND 0.302 INCHES MAXIMUM NUT |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
1.248 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |