| MATT |
MATERIAL |
COPPER ALLOY 360 NUT |
| BZRR |
THREAD SERIES |
UNF |
| ADEB |
PLATE THICKNESS |
0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ADEA |
NUT HEIGHT |
0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| SFTT |
SURFACE TREATMENT |
OXIDE BASE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ADEC |
PLATE WIDTH |
0.423 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
98.0 DEGREES MINIMUM NUT AND 102.0 DEGREES MAXIMUM NUT |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| SFTT |
SURFACE TREATMENT |
OXIDE NUT |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| MATT |
MATERIAL |
LEAD LOCKING INSERT |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| MATT |
MATERIAL |
COPPER ALLOY 360 BASE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 4610 ASSN STD SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT |
| ACVN |
NUT LENGTH |
0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM |