| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-A-696 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CMLP |
THREAD QUANTITY PER INCH |
36 |
| BZRR |
THREAD SERIES |
UNF |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| ADEB |
PLATE THICKNESS |
0.031 INCHES MINIMUM AND 0.063 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-351-CANC FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-355 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| CRSQ |
COUNTERSINK ANGLE |
81.5 DEGREES MINIMUM NUT AND 82.5 DEGREES MAXIMUM NUT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.683 INCHES MINIMUM AND 0.693 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.422 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.328 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
PLATE |
| ADEA |
NUT HEIGHT |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2017 OVERALL OR ALUMINUM ALLOY 2024 OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ACVN |
NUT LENGTH |
0.953 INCHES MINIMUM AND 0.985 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| AAJD |
THREAD CLASS |
2B |