| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-367,T6 FED SPEC SINGLE MATERIAL RESPONSE SHELL |
| BZRR |
THREAD SERIES |
UNF |
| ADFX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE SHELL |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH METALLIC INSERT |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2219 SHELL |
| ADFV |
DISTANCE FROM MOUNTING HOLE CENTER TO BASE |
0.250 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AZKQ |
TEMP RATING |
350.0 DEG FAHRENHEIT NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING LOCKING INSERT |
| ACTA |
NUT STYLE |
PLATE |
| AAJD |
THREAD CLASS |
3B |
| ADEC |
PLATE WIDTH |
1.570 INCHES MAXIMUM |
| ADEA |
NUT HEIGHT |
1.500 INCHES NOMINAL |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| ADEB |
PLATE THICKNESS |
0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| ADBR |
DISTANCE FROM BASE TO CENTER OF APERTURE |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS7245 ASSN STD SINGLE MATERIAL RESPONSE LOCKING INSERT |
| SFTT |
SURFACE TREATMENT |
CHROMATE SHELL |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
3 HOLES |
| SFTT |
SURFACE TREATMENT |
ZINC LOCKING INSERT |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| ACVN |
NUT LENGTH |
2.060 INCHES MINIMUM AND 2.080 INCHES MAXIMUM |