| MATT |
MATERIAL |
RUBBER SYNTHETIC SEAL |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING NUT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE SHELL |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING WASHER |
| ADEA |
NUT HEIGHT |
0.628 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM SHELL |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| AAUM |
LOCKING FEATURE |
ANY ACCEPTABLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-R-6855,CL 1,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE SEAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ACVN |
NUT LENGTH |
0.989 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
PLATE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| AAJD |
THREAD CLASS |
3B |
| ABTB |
MOUNTING HOLE DIAMETER |
0.093 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADEB |
PLATE THICKNESS |
0.030 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE WASHER |
| ABAJ |
LUBRICATION |
DRY FILM LUBRICANT |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING SHELL |
| ADEC |
PLATE WIDTH |
0.552 INCHES MAXIMUM |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM WASHER |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| CQFM |
HARDNESS RATING |
36.0 ROCKWELL C MINIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| BZRR |
THREAD SERIES |
UNJF |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| CMLP |
THREAD QUANTITY PER INCH |
32 |