| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| ADAZ |
THRU-HOLE DIAMETER |
0.260 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.391 INCHES MINIMUM AND 0.421 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 OVERALL |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8,ALLOY 5052,TEMPER H32 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-250/8,H34 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-A-250/8,A36 FED SPEC 3RD MATERIAL RESPONSE OVERALL |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.341 INCHES MINIMUM AND 0.347 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
PLATE NUT SPACER |
| ADFR |
MOUNTING PROVISION LOCATION |
NUT PROJECTION SIDE |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADEB |
PLATE THICKNESS |
0.059 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS463 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ACVN |
NUT LENGTH |
0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM |