| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL EXCEPT INSERT |
| ADEB |
PLATE THICKNESS |
0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL NUT |
| MATT |
MATERIAL |
STEEL COMP 1212 BRACKET |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ADEA |
NUT HEIGHT |
0.344 INCHES NOMINAL |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MATT |
MATERIAL |
STEEL COMP 1212 NUT |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL EXCEPT INSERT |
| ACVN |
NUT LENGTH |
0.969 INCHES NOMINAL |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES |
| BZRR |
THREAD SERIES |
UNC |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFR |
MOUNTING PROVISION LOCATION |
OPPOSITE NUT PROJECTION SIDE |
| ADEC |
PLATE WIDTH |
0.438 INCHES NOMINAL |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |