| ADEB |
PLATE THICKNESS |
0.090 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/3,T6 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-250/5,T3 OR T4 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-A-250/13,T6 FED SPEC 3RD MATERIAL RESPONSE OVERALL |
| ADEC |
PLATE WIDTH |
0.440 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 OVERALL OR ALUMINUM ALLOY 2014 OVERALL OR ALUMINUM ALLOY 7075 OVERALL |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| ACTA |
NUT STYLE |
PLATE NUT SPACER |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.342 INCHES MINIMUM AND 0.346 INCHES MAXIMUM |
| ADAZ |
THRU-HOLE DIAMETER |
0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ADFR |
MOUNTING PROVISION LOCATION |
NUT PROJECTION SIDE |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ABTB |
MOUNTING HOLE DIAMETER |
0.102 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| ACVN |
NUT LENGTH |
0.954 INCHES MINIMUM AND 0.984 INCHES MAXIMUM |