| ADEC |
PLATE WIDTH |
0.578 INCHES NOMINAL |
| BZRR |
THREAD SERIES |
UNF |
| ADEB |
PLATE THICKNESS |
0.050 INCHES NOMINAL |
| ADFV |
DISTANCE FROM MOUNTING HOLE CENTER TO BASE |
ANY ACCEPTABLE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 BASE |
| ADBR |
DISTANCE FROM BASE TO CENTER OF APERTURE |
0.281 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/7 FED SPEC SINGLE MATERIAL RESPONSE BASE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.890 INCHES NOMINAL |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2017 NUT OR ALUMINUM ALLOY 5052 NUT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/5,T4 FED SPEC 1ST MATERIAL RESPONSE NUT OR AMS 4016 ASSN STD 2ND MATERIAL RESPONSE NUT |
| AAJD |
THREAD CLASS |
3B |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING INSERT OR FIBER LOCKING INSERT |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
| ADEA |
NUT HEIGHT |
0.328 INCHES NOMINAL |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
ANODIZE BASE |
| SFTT |
SURFACE TREATMENT |
ANODIZE NUT |