| BZRR |
THREAD SERIES |
UNF |
| ADEB |
PLATE THICKNESS |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE BASE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 BASE |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
1.032 INCHES MINIMUM AND 1.062 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING INSERT |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| AAJD |
THREAD CLASS |
3B |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.329 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 NUT |
| ADEC |
PLATE WIDTH |
0.500 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| ADEA |
NUT HEIGHT |
0.348 INCHES MINIMUM AND 0.378 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFR |
MOUNTING PROVISION LOCATION |
OPPOSITE NUT PROJECTION SIDE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
ANODIZE BASE |
| SFTT |
SURFACE TREATMENT |
ANODIZE NUT |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |