| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2014 OVERALL OR ALUMINUM ALLOY 2024 OVERALL OR ALUMINUM ALLOY 7075 OVERALL |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| ADEB |
PLATE THICKNESS |
0.090 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
DYED ORANGE |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
PLATE NUT SPACER |
| ADAZ |
THRU-HOLE DIAMETER |
0.330 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
1.281 INCHES NOMINAL |
| ADEC |
PLATE WIDTH |
0.516 INCHES NOMINAL |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFR |
MOUNTING PROVISION LOCATION |
OPPOSITE NUT PROJECTION SIDE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/3,ALLOY 2014,TEMPER T6 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-250/5,T42 FED SPEC 3RD MATERIAL RESPONSE OVERALL OR QQ-A-250/5,ALLOY 2024,TEMPER T3 FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-A-250/13,ALLOY 7075,TEMPER T6 FED SPEC 4TH MATERIAL RESPONSE OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS463 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |