| BZRR |
THREAD SERIES |
UNF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH METALLIC INSERT |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ADFX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH |
1.000 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
OXIDE FILM NUT |
| ADEC |
PLATE WIDTH |
1.460 INCHES MINIMUM AND 1.570 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADEA |
NUT HEIGHT |
2.410 INCHES MINIMUM AND 2.470 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS7245 ASSN STD 2ND MATERIAL RESPONSE LOCKING INSERT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ADBR |
DISTANCE FROM BASE TO CENTER OF APERTURE |
0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING LOCKING INSERT |
| ACTA |
NUT STYLE |
PLATE |
| AZKQ |
TEMP RATING |
NOT RATED |
| ADEB |
PLATE THICKNESS |
0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2014 SHELL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-367 FED SPEC 1ST MATERIAL RESPONSE SHELL |
| ACVN |
NUT LENGTH |
3.000 INCHES MINIMUM AND 3.120 INCHES MAXIMUM |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
3 HOLES |
| ADFV |
DISTANCE FROM MOUNTING HOLE CENTER TO BASE |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
2B |
| CMLP |
THREAD QUANTITY PER INCH |
32 |