| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE NUT |
| ADFK |
NUT COUNTERBORE DEPTH |
0.055 INCHES MINIMUM NUT AND 0.085 INCHES MAXIMUM NUT |
| ADEC |
PLATE WIDTH |
0.619 INCHES MAXIMUM |
| ADEB |
PLATE THICKNESS |
0.075 INCHES MAXIMUM |
| MATT |
MATERIAL |
PLASTIC LOCKING INSERT |
| ACVN |
NUT LENGTH |
0.906 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL NUT |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| ADFV |
DISTANCE FROM MOUNTING HOLE CENTER TO BASE |
0.469 INCHES MINIMUM AND 0.499 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| SFTT |
SURFACE TREATMENT |
ANODIZE SHELL OR CHROMATE SHELL OR CADMIUM SHELL |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| AAJD |
THREAD CLASS |
3B |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE SHELL OR MIL-A-8625,TYPE 1 MIL SPEC 2ND TREATMENT RESPONSE SHELL OR QQ-P-416 FED SPEC 2ND TREATMENT RESPONSE SHELL |
| ABAJ |
LUBRICATION |
DRY FILM LUBRICANT |
| ADBR |
DISTANCE FROM BASE TO CENTER OF APERTURE |
0.266 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNJC |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1033 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| MATT |
MATERIAL |
ALUMINUM ALLOY SHELL OR STEEL SHELL |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ADEA |
NUT HEIGHT |
0.343 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AAWY |
COUNTERBORE DIAMETER |
0.140 INCHES MINIMUM NUT AND 0.155 INCHES MAXIMUM NUT |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |