| CMLP |
THREAD QUANTITY PER INCH |
24 |
| MATT |
MATERIAL |
ALUMINUM ALLOY NUT |
| ADEB |
PLATE THICKNESS |
0.075 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
120.0 DEGREES NOMINAL NUT |
| ADEC |
PLATE WIDTH |
0.531 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL EXCEPT INSERT OR CHROMATE OVERALL EXCEPT INSERT |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING INSERT |
| ACVN |
NUT LENGTH |
1.250 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| AAJD |
THREAD CLASS |
3B |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.312 INCHES |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1025 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT OR MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT |
| ADEA |
NUT HEIGHT |
0.375 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| BZRR |
THREAD SERIES |
UNJF |
| ABTB |
MOUNTING HOLE DIAMETER |
0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |