| ADEA |
NUT HEIGHT |
0.240 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| ADEB |
PLATE THICKNESS |
0.075 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
88.0 DEGREES MINIMUM NUT AND 102.0 DEGREES MAXIMUM NUT |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL NUT |
| CMLP |
THREAD QUANTITY PER INCH |
28 |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| ACVN |
NUT LENGTH |
1.062 INCHES MAXIMUM |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING INSERT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ACTA |
NUT STYLE |
PLATE |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES OR DIMPLED HOLES |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| AAJD |
THREAD CLASS |
3B |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MAXIMUM |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.438 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFR |
MOUNTING PROVISION LOCATION |
OPPOSITE NUT PROJECTION SIDE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| BZRR |
THREAD SERIES |
UNJF |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |