| ABQU |
DRIVE POINT DEPTH |
0.100 INCHES NOMINAL |
| ADFK |
NUT COUNTERBORE DEPTH |
0.120 INCHES NOMINAL NUT |
| ADBJ |
UNDERCUT THICKNESS |
0.500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/3,T4 FED SPEC 1ST MATERIAL RESPONSE LOCKING INSERT |
| ABPH |
SMALL END DIAMETER |
2.230 INCHES MINIMUM AND 2.232 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ADBM |
DRIVE POINT QUANTITY |
4 |
| ADBG |
NUT THICKNESS |
0.690 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| CMLP |
THREAD QUANTITY PER INCH |
16 |
| BZRR |
THREAD SERIES |
UN |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| CQJX |
NOMINAL THREAD SIZE |
2.000 INCHES |
| ACTA |
NUT STYLE |
ROUND |
| ADBH |
DRIVE POINT WIDTH |
0.125 INCHES NOMINAL |
| AAWY |
COUNTERBORE DIAMETER |
2.027 INCHES MINIMUM NUT AND 2.032 INCHES MAXIMUM NUT |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 LOCKING INSERT |
| ACTD |
NUT DIAMETER |
2.440 INCHES MINIMUM AND 2.450 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE NUT |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE NUT |