| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.341 INCHES MINIMUM AND 0.345 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.503 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.066 INCHES MINIMUM AND 0.071 INCHES MAXIMUM |
| AZKQ |
TEMP RATING |
450.0 DEG FAHRENHEIT NOMINAL |
| ADEB |
PLATE THICKNESS |
0.047 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
0.242 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS697 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CQFM |
HARDNESS RATING |
NOT RATED |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ACTA |
NUT STYLE |
PLATE |
| AAJD |
THREAD CLASS |
3B |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL OVERALL |
| ABAJ |
LUBRICATION |
DRY FILM LUBRICANT |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.171 INCHES NOMINAL |
| BZRR |
THREAD SERIES |
UNJC |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| ADEA |
NUT HEIGHT |
0.171 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| CRSQ |
COUNTERSINK ANGLE |
ANY ACCEPTABLE NUT |
| ADFR |
MOUNTING PROVISION LOCATION |
OPPOSITE NUT PROJECTION SIDE |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |