| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.344 INCHES NOMINAL |
| ADEC |
PLATE WIDTH |
0.453 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY NUT |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| ADEA |
NUT HEIGHT |
0.359 NOMINAL CENTIMETERS |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 NOMINAL MILS AND 0.103 NOMINAL CENTIMETERS |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT NOMINAL |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING INSERT |
| ADFP |
NUT MOUNTING PROVISION |
COUNTERSUNK HOLES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ADEB |
PLATE THICKNESS |
0.075 NOMINAL CENTIMETERS |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1024 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| ACTA |
NUT STYLE |
PLATE |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| AAJD |
THREAD CLASS |
3B |
| BZRR |
THREAD SERIES |
UNJC |
| CSSM |
MOUNTING HOLE COUNTERSINK ANGLE |
98.0 DEGREES MINIMUM AND 102.0 DEGREES MAXIMUM |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
0.984 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFR |
MOUNTING PROVISION LOCATION |
OPPOSITE NUT PROJECTION SIDE |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM NUT AND 101.0 DEGREES MAXIMUM NUT |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| CQJX |
NOMINAL THREAD SIZE |
0.138 INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TYPE1,CLASS1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |