| ADBH |
DRIVE POINT WIDTH |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| BZRR |
THREAD SERIES |
UNS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-16232,TY Z,CL 4A MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| ACTD |
NUT DIAMETER |
4.516 INCHES MINIMUM AND 4.536 INCHES MAXIMUM |
| ADBJ |
UNDERCUT THICKNESS |
0.386 INCHES MINIMUM AND 0.396 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| ABPH |
SMALL END DIAMETER |
4.203 INCHES MINIMUM AND 4.235 INCHES MAXIMUM |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE LOCKING INSERT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81205-BACN10GR MANUFACTURERS STANDARD |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH NONMETALLIC INSERT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758,COND F,SURFACE COND 4 MIL SPEC 1ST MATERIAL RESPONSE NUT |
| ADBM |
DRIVE POINT QUANTITY |
4 |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
NYLON ZYTEL-103 FSCM 81205 MFR REF 2ND MATERIAL RESPONSE LOCKING INSERT |
| CQJX |
NOMINAL THREAD SIZE |
3.730 INCHES |
| CRSQ |
COUNTERSINK ANGLE |
90.0 DEGREES MINIMUM NUT AND 110.0 DEGREES MAXIMUM NUT |
| ABQU |
DRIVE POINT DEPTH |
0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
ROUND |
| MATT |
MATERIAL |
STEEL COMP 4130 NUT |
| CMLP |
THREAD QUANTITY PER INCH |
12 |
| ADBG |
NUT THICKNESS |
0.491 INCHES MINIMUM AND 0.521 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC NUT |