| ADEC |
PLATE WIDTH |
0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE OVERALL |
| ADEB |
PLATE THICKNESS |
0.011 INCHES MINIMUM AND 0.021 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.497 INCHES MINIMUM AND 0.503 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
PLATE NUT SPACER |
| ABTB |
MOUNTING HOLE DIAMETER |
0.134 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
1.266 INCHES MINIMUM AND 1.296 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 304 OVERALL OR STEEL COMP 316 OVERALL OR STEEL CORROSION RESISTING OVERALL |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ADAZ |
THRU-HOLE DIAMETER |
0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS463 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |