| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.310 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| ADFK |
NUT COUNTERBORE DEPTH |
0.062 INCHES MINIMUM NUT |
| ADEB |
PLATE THICKNESS |
0.075 INCHES MAXIMUM |
| ABKW |
OVERALL HEIGHT |
0.428 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL NUT |
| CQFM |
HARDNESS RATING |
NOT RATED |
| SFTT |
SURFACE TREATMENT |
CADMIUM CAP AND CHROMATE CAP |
| ADEC |
PLATE WIDTH |
0.406 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ZZZK |
SPECIFICATION/STANDARD DATA |
26512-GN500P MANUFACTURERS STANDARD |
| ACTA |
NUT STYLE |
PLATE |
| SFTT |
SURFACE TREATMENT |
CADMIUM NUT AND CHROMATE NUT |
| AAJD |
THREAD CLASS |
3B |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE CAP |
| ADEA |
NUT HEIGHT |
ANY ACCEPTABLE |
| ABAJ |
LUBRICATION |
SOLUBLE LUBRICANT |
| BZRR |
THREAD SERIES |
UNJC |
| AAWY |
COUNTERBORE DIAMETER |
0.168 INCHES MINIMUM NUT |
| CQJX |
NOMINAL THREAD SIZE |
0.164 INCHES |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| MATT |
MATERIAL |
STEEL CAP OR PLASTIC POLYAMIDE CAP |
| ACVN |
NUT LENGTH |
1.011 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| AZKQ |
TEMP RATING |
250.0 DEG FAHRENHEIT MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |