| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL |
| ZZZK |
SPECIFICATION/STANDARD DATA |
26512-GN10FM MANUFACTURERS STANDARD |
| ADBG |
NUT THICKNESS |
0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
18 |
| ADBM |
DRIVE POINT QUANTITY |
2 |
| CQFM |
HARDNESS RATING |
NOT RATED |
| ADBH |
DRIVE POINT WIDTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| FEAT |
SPECIAL FEATURES |
3 HOLES EACH ON OPPOSITE FACES 120 DEG APART,0.045 IN. MIN 0.050 IN. MAX DIA AND DRILLED ON 45 DEG ANGLE |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABQU |
DRIVE POINT DEPTH |
0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
ROUND |
| BZRR |
THREAD SERIES |
UNJEF |
| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
1.562 INCHES |
| CRSQ |
COUNTERSINK ANGLE |
88.0 DEGREES MINIMUM BOTH ENDS AND 92.0 DEGREES MAXIMUM BOTH ENDS |
| ACTD |
NUT DIAMETER |
2.046 INCHES MINIMUM AND 2.078 INCHES MAXIMUM |