| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 1 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| ACVN |
NUT LENGTH |
0.975 INCHES MINIMUM AND 0.995 INCHES MAXIMUM |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.344 INCHES NOMINAL |
| BZRR |
THREAD SERIES |
UNF |
| ADFK |
NUT COUNTERBORE DEPTH |
0.139 INCHES MINIMUM NUT AND 0.155 INCHES MAXIMUM NUT |
| ADEB |
PLATE THICKNESS |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL OR CHROMATE OVERALL |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE WITH METALLIC INSERT |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ADEA |
NUT HEIGHT |
0.580 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.128 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-A-12545,TEMPER T6 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ACTA |
NUT STYLE |
PLATE |
| AZKQ |
TEMP RATING |
NOT RATED |
| ADEC |
PLATE WIDTH |
0.386 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 OVERALL |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.686 INCHES MINIMUM AND 0.690 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| AAJD |
THREAD CLASS |
2B |
| AAWY |
COUNTERBORE DIAMETER |
0.196 INCHES MINIMUM NUT AND 0.202 INCHES MAXIMUM NUT |
| CMLP |
THREAD QUANTITY PER INCH |
32 |