| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 1 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| BZRR |
THREAD SERIES |
UNF |
| SFTT |
SURFACE TREATMENT |
ANODIZE OVERALL OR CHROMATE OVERALL |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ADFX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH |
1.000 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
1.460 INCHES MINIMUM AND 1.570 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.128 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81205-BACN10GH MANUFACTURERS STANDARD |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ADBR |
DISTANCE FROM BASE TO CENTER OF APERTURE |
0.290 INCHES MINIMUM AND 0.330 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
PLATE |
| AZKQ |
TEMP RATING |
NOT RATED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2014 OVERALL |
| ADEB |
PLATE THICKNESS |
0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| AAJD |
THREAD CLASS |
2B |
| ACVN |
NUT LENGTH |
1.270 INCHES MINIMUM AND 1.330 INCHES MAXIMUM |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| ADEA |
NUT HEIGHT |
1.210 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |