| ADFX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH |
0.484 INCHES MINIMUM AND 0.488 INCHES MAXIMUM |
| ADFK |
NUT COUNTERBORE DEPTH |
0.187 INCHES MINIMUM NUT AND 0.202 INCHES MAXIMUM NUT |
| ADFW |
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AAWY |
COUNTERBORE DIAMETER |
0.194 INCHES MAXIMUM NUT |
| SFTT |
SURFACE TREATMENT |
PASSIVATE FIRST END |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| ADEA |
NUT HEIGHT |
0.395 INCHES MINIMUM AND 0.415 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
NOT RATED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ADEB |
PLATE THICKNESS |
0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| ACTA |
NUT STYLE |
PLATE |
| AAJD |
THREAD CLASS |
3B |
| AZKQ |
TEMP RATING |
NOT RATED |
| ABAJ |
LUBRICATION |
DRY FILM LUBRICANT |
| ACVN |
NUT LENGTH |
0.752 INCHES MINIMUM AND 0.772 INCHES MAXIMUM |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
2 HOLES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FIRST END |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| BZRR |
THREAD SERIES |
UNJF |
| MATT |
MATERIAL |
IRON ALLOY 660 FIRST END |
| CBBL |
FEATURES PROVIDED |
FLOATING NUT |
| CMLP |
THREAD QUANTITY PER INCH |
32 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE FIRST END OR AMS 5525 ASSN STD SINGLE MATERIAL RESPONSE FIRST END OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FIRST END |
| AAUM |
LOCKING FEATURE |
PREVAILING TORQUE ALL METAL DESIGN |