| BZRR |
THREAD SERIES |
UNF |
| ADFV |
DISTANCE FROM MOUNTING HOLE CENTER TO BASE |
ANY ACCEPTABLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL EXCEPT INSERT |
| ADFX |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH |
1.000 INCHES MINIMUM AND 1.020 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.190 INCHES |
| CQFM |
HARDNESS RATING |
NOT RATED |
| ABKW |
OVERALL HEIGHT |
ANY ACCEPTABLE |
| SFTT |
SURFACE TREATMENT |
CHROMATE OVERALL EXCEPT INSERT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING LOCKING INSERT |
| ACTA |
NUT STYLE |
PLATE |
| AZKQ |
TEMP RATING |
NOT RATED |
| ADEA |
NUT HEIGHT |
ANY ACCEPTABLE |
| ADFY |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH |
0.555 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| ACVN |
NUT LENGTH |
1.570 INCHES MAXIMUM |
| ABTB |
MOUNTING HOLE DIAMETER |
0.123 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| ADEC |
PLATE WIDTH |
1.070 INCHES MAXIMUM |
| ADEB |
PLATE THICKNESS |
0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| ADBR |
DISTANCE FROM BASE TO CENTER OF APERTURE |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-367 FED SPEC SINGLE MATERIAL RESPONSE NUT |
| ADFP |
NUT MOUNTING PROVISION |
STRAIGHT HOLES |
| ADFU |
MOUNTING HOLE ARRANGEMENT STYLE |
3 HOLES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2219 NUT |
| AAJD |
THREAD CLASS |
2B |
| CMLP |
THREAD QUANTITY PER INCH |
32 |