| ABRD |
SECOND HOLE DIAMETER |
0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| ABRC |
FIRST HOLE DIAMETER |
0.045 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| ACHU |
PIN OVERALL DIAMETER |
0.1970 INCHES MINIMUM AND 0.1972 INCHES MAXIMUM |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.050 INCHES NOMINAL |
| ACHT |
PIN OVERALL LENGTH |
0.570 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-764,TYPE 416 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AMCS |
FIRST END TAPER LENGTH |
0.020 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 416 OVERALL |
| ABRF |
CENTER TO CENTER DISTANCE BETWEEN HOLES |
0.460 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES BOTH ENDS |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
WPS10012,79294 MFR REF SINGLE TREATMENT RESPONSE OVERALL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| ABRB |
HOLE ARRANGEMENT STYLE |
BOTH END DRILLED |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES OUTSIDE DIAMETER |