| AASK |
HEAD STYLE |
KNURLED NO. 1 |
| ABPB |
UNDER HEAD LENGTH |
0.760 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
42.0 ROCKWELL C MINIMUM OVERALL AND 46.0 ROCKWELL C MAXIMUM OVERALL |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| AMCS |
FIRST END TAPER LENGTH |
0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| ABMZ |
DIAMETER |
0.2490 INCHES MINIMUM AND 0.2498 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATT |
MATERIAL |
STEEL COMP O2 OVERALL |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| ABPC |
UNDERCUT WIDTH |
0.040 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
HEAD,POINTED,.010 IN. PORM .030 IN. SPHER R; HEAD ANGLE,.88 DEG PORM .92 DEG |
| HGTH |
HEIGHT |
0.160 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
CASEHARDENED |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| ABRC |
FIRST HOLE DIAMETER |
0.078 INCHES MINIMUM AND 0.083 INCHES MAXIMUM |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
16.0 MICROINCHES LONG SHANK |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRRG |
PIN HEAD DIAMETER |
0.300 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |