| AMDW |
FIRST END SLOT DEPTH |
0.094 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES OVERALL |
| ABRC |
FIRST HOLE DIAMETER |
0.077 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
SLOTTED |
| ABMZ |
DIAMETER |
0.2492 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| CQFM |
HARDNESS RATING |
38.0 ROCKWELL C MINIMUM OVERALL AND 44.0 ROCKWELL C MAXIMUM OVERALL |
| ABHP |
OVERALL LENGTH |
2.870 INCHES NOMINAL |
| ABNZ |
EFFECTIVE LENGTH |
2.250 INCHES NOMINAL |
| AKTM |
FIRST END SLOT WIDTH |
0.050 INCHES NOMINAL |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.138 INCHES NOMINAL |
| CRDY |
FIRST END LOCATION |
BOTH ENDS |
| FEAT |
SPECIAL FEATURES |
1/4-28 UNF-2A THREADED TO GROOVES ON BOTH ENDS; HOLES DRILLED 90 DEG TO SLOT BOTH ENDS |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| ABRF |
CENTER TO CENTER DISTANCE BETWEEN HOLES |
2.594 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.070 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
BOTH END DRILLED |
| ABRD |
SECOND HOLE DIAMETER |
0.077 INCHES MINIMUM AND 0.082 INCHES MAXIMUM |
| ABPE |
UNDERCUT RADIUS |
0.035 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758,D4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABPA |
UNDERCUT DIAMETER |
0.195 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |