| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-16232 TY 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ANEE |
GRIP LENGTH |
0.671 INCHES NOMINAL |
| ABNZ |
EFFECTIVE LENGTH |
0.6378 INCHES MINIMUM AND 0.6398 INCHES MAXIMUM |
| ABPB |
UNDER HEAD LENGTH |
0.829 INCHES MINIMUM AND 0.859 INCHES MAXIMUM |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE MANGANESE OVERALL |
| CQFM |
HARDNESS RATING |
89.0 ROCKWELL SUPERFICIAL 15-N NOMINAL OVERALL |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| ABPC |
UNDERCUT WIDTH |
0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLAT |
| ABRC |
FIRST HOLE DIAMETER |
0.0625 INCHES MINIMUM AND 0.0629 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.062 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL OVERALL |
| HGTH |
HEIGHT |
0.047 INCHES MINIMUM AND 0.077 INCHES MAXIMUM |
| ABMZ |
DIAMETER |
0.3116 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM |
| CBBL |
FEATURES PROVIDED |
CASEHARDENED |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.169 INCHES MINIMUM AND 0.179 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.300 INCHES MINIMUM AND 0.305 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CRRG |
PIN HEAD DIAMETER |
0.875 INCHES NOMINAL |