| CRMG |
FIRST END TAPER ANGLE |
40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| CQFM |
HARDNESS RATING |
55.0 ROCKWELL C MINIMUM OVERALL AND 60.0 ROCKWELL C MAXIMUM OVERALL |
| MATT |
MATERIAL |
STEEL COMP 1020 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES OUTSIDE DIAMETER |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-16232 TY 2 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-16232 TY 1 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE ZINC OVERALL OR PHOSPHATE MANGANESE OVERALL |
| ABPC |
UNDERCUT WIDTH |
0.028 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| ABPD |
SECOND UNDERCUT WIDTH |
0.028 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| ABPA |
UNDERCUT DIAMETER |
0.350 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| ABMZ |
DIAMETER |
0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| CRDY |
FIRST END LOCATION |
BOTH ENDS |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| ABNZ |
EFFECTIVE LENGTH |
0.750 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.005 INCHES MINIMUM AND 0.025 INCHES MAXIMUM |