| AAZP |
CHAMFER LENGTH |
0.077 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| CRRG |
PIN HEAD DIAMETER |
1.046 INCHES MINIMUM AND 1.078 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL OR STEEL COMP 8630 OVERALL |
| ABMZ |
DIAMETER |
0.869 INCHES MINIMUM AND 0.871 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| CQSX |
SHEAR STRENGTH |
90200 DOUBLE POUND |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| FEAT |
SPECIAL FEATURES |
SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THE VENDOR |
| ABRC |
FIRST HOLE DIAMETER |
0.161 INCHES MINIMUM AND 0.181 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
26.5 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.196 INCHES NOMINAL |
| CQPJ |
PIN CHAMFER ANGLE |
14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| STYL |
STYLE DESIGNATOR |
STRAIGHT |
| ABPB |
UNDER HEAD LENGTH |
1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| HGTH |
HEIGHT |
0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |