| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.390 INCHES NOMINAL |
| AAZE |
SHANK DIAMETER |
0.254 INCHES MINIMUM AND 0.256 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
UNDERCUT |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| AATR |
SHANK LENGTH |
0.077 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| AKTY |
SECOND END COUNTERBORE DIAMETER |
0.106 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
COUNTERBORED W/O THRU HOLE |
| AAVH |
SHOULDER DIAMETER |
0.312 INCHES NOMINAL |
| MATT |
MATERIAL |
PLASTIC POLYTETRAFLUOROETHYLENE OVERALL |
| ABPC |
UNDERCUT WIDTH |
0.069 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
ITEM HAS A TOTAL OF 10 HOLES SPACED EQUALLY |
| ABRC |
FIRST HOLE DIAMETER |
0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-P-19468,GROUP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABPA |
UNDERCUT DIAMETER |
0.247 INCHES MINIMUM AND 0.249 INCHES MAXIMUM |
| ABRD |
SECOND HOLE DIAMETER |
0.053 INCHES MINIMUM AND 0.057 INCHES MAXIMUM |
| ABRF |
CENTER TO CENTER DISTANCE BETWEEN HOLES |
1.215 INCHES NOMINAL |
| CRDY |
FIRST END LOCATION |
CHAMFERED END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| AMCS |
FIRST END TAPER LENGTH |
0.031 INCHES NOMINAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
BOTH END DRILLED |
| ABHP |
OVERALL LENGTH |
1.882 INCHES NOMINAL |