| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A582 ASSN STD ALL MATERIAL RESPONSES OVERALL |
| ABMZ |
DIAMETER |
0.1570 INCHES MINIMUM AND 0.1573 INCHES MAXIMUM |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.144 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |
| ABPB |
UNDER HEAD LENGTH |
0.790 INCHES MINIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.010 INCHES MINIMUM AND 0.020 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| ABPD |
SECOND UNDERCUT WIDTH |
0.144 INCHES MINIMUM AND 0.147 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 303 OVERALL OR STEEL COMP 303SE OVERALL |
| AASK |
HEAD STYLE |
FLAT CHAMFER |
| HGTH |
HEIGHT |
0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM |
| ABPC |
UNDERCUT WIDTH |
0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM |
| ABNZ |
EFFECTIVE LENGTH |
0.722 INCHES NOMINAL |
| CRRG |
PIN HEAD DIAMETER |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES OUTSIDE DIAMETER |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |
| ABPF |
SECOND UNDERCUT DIAMETER |
0.012 INCHES MINIMUM AND 0.014 INCHES MAXIMUM |