| CRMG |
FIRST END TAPER ANGLE |
150.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAGZ |
FIRST END STYLE |
POINTED |
| STYL |
STYLE DESIGNATOR |
THREADED AT SMALL END |
| CRDY |
FIRST END LOCATION |
POINTED END |
| ABQB |
TAPER MAJOR DIAMETER |
0.505 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 2330 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL |
| ANEE |
GRIP LENGTH |
2.234 INCHES MINIMUM AND 2.266 INCHES MAXIMUM |
| ABND |
TAPER LENGTH |
2.422 INCHES MINIMUM AND 2.453 INCHES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| AMCS |
FIRST END TAPER LENGTH |
0.093 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.172 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| CQRR |
TAPER |
0.500 PER FOOT IN INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNF |
| ABRC |
FIRST HOLE DIAMETER |
0.090 INCHES MINIMUM AND 0.122 INCHES MAXIMUM |
| AAHP |
SECOND END STYLE |
SQUARE |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR QQ-S-689 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ABQA |
TAPER MINOR DIAMETER |
0.453 INCHES MINIMUM AND 0.457 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |