| ACHU |
PIN OVERALL DIAMETER |
0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM |
| CRMG |
FIRST END TAPER ANGLE |
25.0 DEGREES MINIMUM AND 35.0 DEGREES MAXIMUM |
| ABRF |
CENTER TO CENTER DISTANCE BETWEEN HOLES |
4.187 INCHES MINIMUM AND 4.217 INCHES MAXIMUM |
| ABRC |
FIRST HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.190 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 630 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ACHT |
PIN OVERALL LENGTH |
4.560 INCHES NOMINAL |
| ABRD |
SECOND HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES OUTSIDE DIAMETER |
| AMCS |
FIRST END TAPER LENGTH |
0.090 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| ABRB |
HOLE ARRANGEMENT STYLE |
BOTH END DRILLED |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |