| ABRC |
FIRST HOLE DIAMETER |
0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| AATR |
SHANK LENGTH |
0.410 INCHES MINIMUM AND 0.470 INCHES MAXIMUM |
| ABHP |
OVERALL LENGTH |
1.930 INCHES MINIMUM AND 1.950 INCHES MAXIMUM |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE MANGANESE OVERALL OR PHOSPHATE ZINC OVERALL |
| AMCS |
FIRST END TAPER LENGTH |
0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
33.0 ROCKWELL C MINIMUM OVERALL AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| CSYM |
SURFACE FINISH |
125.000 MICROINCHES OVERALL |
| AAZE |
SHANK DIAMETER |
0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
SHOULDER |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-16232,TYPE M,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL OR MIL-P-16232,TYPE Z,CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAVH |
SHOULDER DIAMETER |
0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| CRDY |
FIRST END LOCATION |
BOTH ENDS |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-624,COMP 4140 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |