| ALWR |
FIRST END CORNER RADIUS |
0.020 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
32.0 MICROINCHES LONG END |
| ABPB |
UNDER HEAD LENGTH |
1.250 INCHES NOMINAL |
| CRRG |
PIN HEAD DIAMETER |
0.500 INCHES NOMINAL |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES SHOULDER END |
| ABNZ |
EFFECTIVE LENGTH |
1.146 INCHES MINIMUM AND 1.166 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
RADIUS |
| AASK |
HEAD STYLE |
PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| CSYM |
SURFACE FINISH |
125.0 MICROINCHES HEAD BEARING SURFACE |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE MANGANESE OVERALL |
| ABRB |
HOLE ARRANGEMENT STYLE |
DRILLED THRU CENTER |
| ABPF |
SECOND UNDERCUT DIAMETER |
0.365 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| ABPA |
UNDERCUT DIAMETER |
0.350 INCHES MINIMUM AND 0.354 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL OVERALL |
| ABPC |
UNDERCUT WIDTH |
0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
END OPPOSITE HEAD IS DRILLED 0.159 IN. DIA 0.750 IN. DEEP AND TAPPED 10-32 NF-2 0.300 IN. DEEP ON AXIAL C CTR LINE |
| ABRC |
FIRST HOLE DIAMETER |
0.094 INCHES NOMINAL |
| ABMZ |
DIAMETER |
0.375 INCHES MINIMUM AND 0.3754 INCHES MAXIMUM |
| ABPD |
SECOND UNDERCUT WIDTH |
0.047 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| HGTH |
HEIGHT |
0.094 INCHES NOMINAL |