| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4130 OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| CQTR |
SECOND SHANK DIAMETER |
0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| AMCS |
FIRST END TAPER LENGTH |
0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.3737 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM |
| CSYM |
SURFACE FINISH |
63.000 MICROINCHES OVERALL |
| CRMG |
FIRST END TAPER ANGLE |
44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| AAJD |
THREAD CLASS |
3A |
| CRDY |
FIRST END LOCATION |
SHORT SHANK END |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES |
| ABHP |
OVERALL LENGTH |
1.220 INCHES MINIMUM AND 1.280 INCHES MAXIMUM |
| AATR |
SHANK LENGTH |
0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| STYL |
STYLE DESIGNATOR |
SHOULDER |
| ABRC |
FIRST HOLE DIAMETER |
0.105 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| AAHP |
SECOND END STYLE |
CHAMFERED |
| THSD |
THREAD SERIES DESIGNATOR |
UNC |
| AASA |
THREAD LENGTH |
0.488 INCHES MINIMUM AND 0.508 INCHES MAXIMUM |
| AMFM |
SECOND END TAPER LENGTH |
0.030 INCHES MINIMUM AND 0.050 INCHES MAXIMUM |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| CTHC |
SECOND END TAPER ANGLE |
44.5 DEGREES MINIMUM AND 45.5 DEGREES MAXIMUM |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| CWAS |
SECOND SHANK LENGTH |
0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| AAVJ |
SHOULDER WIDTH ACROSS FLATS |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL |