| CMLP |
THREAD QUANTITY PER INCH |
24 |
| AAVH |
SHOULDER DIAMETER |
0.500 INCHES NOMINAL |
| CTHC |
SECOND END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| TEST |
TEST DATA DOCUMENT |
81349-MIL-I-6868 SPECIFICATION |
| FEAT |
SPECIAL FEATURES |
LARGE STUD END DRILLED LONGITUDINALLY 0.186 IN. MIN,0.192 IN. MAX DIA BY 1.500 IN. DEEP |
| MATT |
MATERIAL |
STEEL COMP 630 OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CSYM |
SURFACE FINISH |
125.000 MICROINCHES OVERALL |
| AAJD |
THREAD CLASS |
3A |
| CWAS |
SECOND SHANK LENGTH |
1.875 INCHES NOMINAL |
| AAVJ |
SHOULDER WIDTH ACROSS FLATS |
0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND |
| CQFM |
HARDNESS RATING |
38.0 ROCKWELL C MINIMUM OVERALL AND 45.0 ROCKWELL C MAXIMUM OVERALL |
| STYL |
STYLE DESIGNATOR |
SHOULDER |
| ABHP |
OVERALL LENGTH |
2.750 INCHES NOMINAL |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
AAZE |
| CRDY |
FIRST END LOCATION |
THREADED END |
| AAHP |
SECOND END STYLE |
CHAMFERED |
| CQJX |
NOMINAL THREAD SIZE |
0.312 INCHES |
| AMFM |
SECOND END TAPER LENGTH |
0.047 INCHES NOMINAL |
| AAZE |
SHANK DIAMETER |
0.312 INCHES NOMINAL |
| AASA |
THREAD LENGTH |
0.750 INCHES NOMINAL |
| AATR |
SHANK LENGTH |
0.750 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| AMCS |
FIRST END TAPER LENGTH |
0.031 INCHES NOMINAL |
| CQTR |
SECOND SHANK DIAMETER |
0.3745 INCHES MINIMUM AND 0.3750 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE OVERALL |