| FEAT |
SPECIAL FEATURES |
EFFECTIVE LG FLATTENED PARALLEL TO HOLE TO DP OF GROOVE,FINAL 0.090 IN. INCREASING TO MEET END DIMENSION OF 0.320 IN. MEASURED FROM FLAT TO BOTTOM OF PIN |
| ABRC |
FIRST HOLE DIAMETER |
0.196 INCHES NOMINAL |
| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4140 OVERALL |
| ABPE |
UNDERCUT RADIUS |
0.090 INCHES NOMINAL |
| AMCS |
FIRST END TAPER LENGTH |
0.030 INCHES NOMINAL |
| ABPA |
UNDERCUT DIAMETER |
0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
GROOVE |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.250 INCHES NOMINAL |
| CTHC |
SECOND END TAPER ANGLE |
30.0 DEGREES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5626,COND F1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAHP |
SECOND END STYLE |
CHAMFERED |
| AMFM |
SECOND END TAPER LENGTH |
0.060 INCHES NOMINAL |
| CRDY |
FIRST END LOCATION |
BOTH ENDS |
| ABRB |
HOLE ARRANGEMENT STYLE |
ONE END DRILLED |
| ABMZ |
DIAMETER |
0.375 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CSYM |
SURFACE FINISH |
63.0 MICROINCHES OUTSIDE DIAMETER |
| ABHP |
OVERALL LENGTH |
4.000 INCHES NOMINAL |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| ABNZ |
EFFECTIVE LENGTH |
3.030 INCHES NOMINAL |
| ABPC |
UNDERCUT WIDTH |
0.180 INCHES NOMINAL |