| ABRD |
SECOND HOLE DIAMETER |
0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
0.140 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-8965 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S06758 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| AAZP |
CHAMFER LENGTH |
0.078 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY II CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ABMZ |
DIAMETER |
0.498 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4037 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 8630 OVERALL |
| ABPB |
UNDER HEAD LENGTH |
2.334 INCHES MINIMUM AND 2.354 INCHES MAXIMUM |
| HGTH |
HEIGHT |
0.093 INCHES NOMINAL |
| ABRF |
CENTER TO CENTER DISTANCE BETWEEN HOLES |
2.350 INCHES NOMINAL |
| CQSX |
SHEAR STRENGTH |
29440 DOUBLE POUND |
| ABRC |
FIRST HOLE DIAMETER |
0.125 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
STRAIGHT |
| CQPJ |
PIN CHAMFER ANGLE |
15.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM OVERALL AND CHROMATE OVERALL |
| ABRB |
HOLE ARRANGEMENT STYLE |
BOTH END DRILLED |
| CRRG |
PIN HEAD DIAMETER |
0.625 INCHES NOMINAL |