| CRMG |
FIRST END TAPER ANGLE |
45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 1017 OVERALL OR STEEL COMP 1016 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1019 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1021 OVERALL OR STEEL COMP 1022 OVERALL OR STEEL COMP 1023 OVERALL OR STEEL COMP 1025 OVERALL |
| ABRC |
FIRST HOLE DIAMETER |
0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| ABRD |
SECOND HOLE DIAMETER |
0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| AGAV |
END ITEM IDENTIFICATION |
TANK, ABRAMS M-1 |
| ABRE |
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN |
1.000 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ACHT |
PIN OVERALL LENGTH |
9.940 INCHES MINIMUM AND 10.060 INCHES MAXIMUM |
| ABRF |
CENTER TO CENTER DISTANCE BETWEEN HOLES |
7.970 INCHES MINIMUM AND 8.030 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
CHAMFERED |
| ABRB |
HOLE ARRANGEMENT STYLE |
BOTH END DRILLED |