| CQSX |
SHEAR STRENGTH |
33000 SINGLE POUNDS PER SQUARE INCH |
| AAZF |
SHANK STYLE |
STRAIGHT W/RADIUS CHAMFERED TIP |
| AAZP |
CHAMFER LENGTH |
0.039 NOMINAL INCHES |
| CRSQ |
COUNTERSINK ANGLE |
100.0 DEGREES NOMINAL |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| TEST |
TEST DATA DOCUMENT |
81349-MILR5674 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AASU |
HEAD HEIGHT |
0.055 INCHES NOMINAL |
| HEAT |
HEAT TREATMENT |
T-4 SOLUTION HEAT TREATED OVERALL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2017 OVERALL |
| AAZE |
SHANK DIAMETER |
0.155 INCHES MINIMUM AND 0.159 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.282 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ANEE |
GRIP LENGTH |
0.318 NOMINAL MILS AND 0.338 NOMINAL CENTIMETERS |