| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-W-405 FED SPEC 1ST MATERIAL RESPONSE STEM OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE STEM |
| ANEE |
GRIP LENGTH |
1.094 INCHES MINIMUM AND 1.157 INCHES MAXIMUM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM BODY AND 40.0 ROCKWELL C MAXIMUM BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
| SFTT |
SURFACE TREATMENT |
CADMIUM BODY |
| AAZG |
HEAD MAJOR DIAMETER |
0.507 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 8740 STEM OR STEEL COMP 8740 STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-W-405 FED SPEC 1ST MATERIAL RESPONSE SLEEVE OR QQ-W-405 FED SPEC 2ND MATERIAL RESPONSE SLEEVE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE SLEEVE OR QQ-S-405 FED SPEC 4TH MATERIAL RESPONSE SLEEVE |
| CQSX |
SHEAR STRENGTH |
5900 SINGLE POUNDS PER SQUARE INCH |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BODY |
| AASB |
FASTENER LENGTH |
1.329 INCHES MINIMUM AND 1.359 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4037 SLEEVE OR STEEL COMP 4130 SLEEVE OR STEEL COMP 4130 SLEEVE OR STEEL COMP 4027 SLEEVE |