| ANEE |
GRIP LENGTH |
0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE AND CHROMATE SLEEVE |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AAZG |
HEAD MAJOR DIAMETER |
0.305 INCHES MAXIMUM |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM SLEEVE AND 48.0 ROCKWELL C MAXIMUM SLEEVE |
| AAZE |
SHANK DIAMETER |
0.197 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC ALL TREATMENT RESPONSES SLEEVE |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQSX |
SHEAR STRENGTH |
2925 SINGLE POUNDS PER SQUARE INCH |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM |
| CQFM |
HARDNESS RATING |
40.0 ROCKWELL C MINIMUM STEM AND 48.0 ROCKWELL C MAXIMUM STEM |
| AASB |
FASTENER LENGTH |
0.522 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 8740 STEM |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4027 SLEEVE OR STEEL COMP 4037 SLEEVE |
| CQBC |
MINIMUM TENSILE STRENGTH |
95000 POUNDS PER SQUARE INCH |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI8740 ASSN STD SINGLE MATERIAL RESPONSE STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI4027 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AISI4037 ASSN STD 2ND MATERIAL RESPONSE SLEEVE |