| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI ASSN STD ALL MATERIAL RESPONSES SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE AND CHROMATE SLEEVE |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM BOLT AND CADMIUM BOLT OR CHROMATE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 1 FED SPEC 1ST TREATMENT RESPONSE BOLT OR QQ-P-416 TY 2 CL 3 FED SPEC 2ND TREATMENT RESPONSE BOLT |
| MATT |
MATERIAL |
STEEL COMP 8740 BOLT |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM SLEEVE AND 40.0 ROCKWELL C MAXIMUM SLEEVE |
| AASB |
FASTENER LENGTH |
1.398 INCHES MAXIMUM |
| AAZG |
HEAD MAJOR DIAMETER |
0.507 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.969 INCHES MINIMUM AND 1.032 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 2 FED SPEC SINGLE TREATMENT RESPONSE MECHANICAL LOCK |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE MECHANICAL LOCK |
| MATT |
MATERIAL |
STEEL COMP 4027 SLEEVE OR STEEL COMP 4037 SLEEVE |
| SFTT |
SURFACE TREATMENT |
CADMIUM MECHANICAL LOCK AND CHROMATE MECHANICAL LOCK |
| CQSX |
SHEAR STRENGTH |
5900 SINGLE POUNDS PER SQUARE INCH |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AISI ASSN STD SINGLE MATERIAL RESPONSE BOLT |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM BOLT AND 53.0 ROCKWELL C MAXIMUM BOLT |
| MATT |
MATERIAL |
STEEL MECHANICAL LOCK |