| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| AASK |
HEAD STYLE |
FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A547 ASSN STD SINGLE MATERIAL RESPONSE STEM OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE STEM |
| AAZF |
SHANK STYLE |
SELF-PLUGGING MECHANICALLY LOCKED STEM |
| CQFM |
HARDNESS RATING |
48.0 ROCKWELL C MINIMUM STEM AND 53.0 ROCKWELL C MAXIMUM STEM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
66 FED STD 1ST MATERIAL RESPONSE SLEEVE OR 66 FED STD 3RD MATERIAL RESPONSE SLEEVE OR ASTM A547 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE SLEEVE |
| CQFM |
HARDNESS RATING |
32.0 ROCKWELL C MINIMUM BODY AND 40.0 ROCKWELL C MAXIMUM BODY |
| SFTT |
SURFACE TREATMENT |
CADMIUM STEM AND CADMIUM STEM OR CHROMATE STEM |
| MATT |
MATERIAL |
STEEL COMP 8740 STEM |
| AAZG |
HEAD MAJOR DIAMETER |
0.507 INCHES MAXIMUM |
| AAZE |
SHANK DIAMETER |
0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 4037 SLEEVE OR STEEL COMP 4027 SLEEVE OR STEEL COMP 4130 SLEEVE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416 TY 1 CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM OR QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM |
| AASB |
FASTENER LENGTH |
1.273 INCHES MAXIMUM |
| ANEE |
GRIP LENGTH |
0.844 INCHES MINIMUM AND 0.907 INCHES MAXIMUM |