| MATT |
MATERIAL |
ALUMINUM ALLOY 7075 BOLT |
| ABAF |
EXPANSION DEVICE |
SERRATED STEM-TYPE W |
| ANEE |
GRIP LENGTH |
0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| CQBC |
MINIMUM TENSILE STRENGTH |
180000 POUNDS PER SQUARE INCH |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE BOLT |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-S-5002 MIL SPEC 1ST TREATMENT RESPONSE SLEEVE AND QQ-P-416,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE SLEEVE OR QQ-P-416,TY 2,CL 3 FED SPEC 3RD TREATMENT RESPONSE SLEEVE |
| AAZE |
SHANK DIAMETER |
0.178 INCHES MINIMUM AND 0.180 INCHES MAXIMUM |
| AASB |
FASTENER LENGTH |
0.290 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AAZF |
SHANK STYLE |
THREADED SELF-PLUGGING SHANK W/SLEEVE |
| CRSQ |
COUNTERSINK ANGLE |
99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT |
| ABAJ |
LUBRICATION |
DRY FILM AND WAX |
| SFTT |
SURFACE TREATMENT |
CADMIUM SLEEVE AND PASSIVATE SLEEVE AND CADMIUM SLEEVE OR CHROMATE SLEEVE |
| ASDB |
WIDTH ACROSS FLATS |
0.277 INCHES MINIMUM AND 0.283 INCHES MAXIMUM |
| HEAT |
HEAT TREATMENT |
ANNEALED OVERALL |
| AASK |
HEAD STYLE |
HEXAGON COUNTERSUNK |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE BOLT |
| MATT |
MATERIAL |
STEEL COMP 303 SLEEVE OR STEEL COMP 304 SLEEVE OR STEEL COMP 303F SLEEVE |
| FEAT |
SPECIAL FEATURES |
BOLT COLOR GREEN |
| ZZZK |
SPECIFICATION/STANDARD DATA |
80205-NAS1754 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CQSX |
SHEAR STRENGTH |
1920 DOUBLE POUNDS PER SQUARE INCH |
| AASU |
HEAD HEIGHT |
0.067 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |